Tyre Recycling Machines Description:
1. CE, ISO9001, SGS Certificate.
2. 100% meet your requirement.
3. Sell to about 126 countries on 6 continents.
4. One year quality guarantee and long-term technical support;
5. With more than 40 years of history in the rubber machine industry.
Waste tire recycling system is used to shred waste tire into rubber powder.
Waste tire--Ring cutter --Strips cutter--Rim cutter --Crushing machine--Finished products
Physic mechanical crushing method at normal temperature of waste tire, no chemical raw material is required, no waste gas, waste water and soot are discharged, and the cooling water of the equipment is reused, no emission, equipment noise is within the range specified by the country(GB20055-2006), fineness of rubber powder produced by it is adjustable(10 to 30 meshes). The process is as follows: Breaking down, crushing, filtering, magnetic separating, grinding and then be finished.
It will separate the sidewall from the top of tire's connection, so that tire sidewall and the top are completely separated.
It will cut sidewall into wide of strips is 3-5 cm, and tire circle reserved.
It will cut the 3-5cm strips into 3.5cm tire block.
Steel wire separator
It will separate the steel and rubber from tire circle mouth parts.
Linear vibrating screen: It will classify the rubber powder for first time
Conveyor machine: Use to transport not up required size re-back to tire shredder machine
Magnetic system: It can classify thin steel from rubber powder
Powder screen: Second time to classify rubber powder
It will cut 3.5cm block into 10-30 mesh size rubber powder.
Our machine can deal with 0.65-1.4m tires, and the whole line need 3-4 workers to operate.
The space requirement is at least 15m length *8m width *6m height.
The machine can make the powder into 10 -30 mesh.
We have three kinds of Model XKP400/450/560.
XKP400 150kg per hour
XKP450 300kg per hour
XKP560 500kg per hour
Rubber Crusher Parameter
|Technical parameter Type
|Front roll diameter(mm)
|Rear roll diameter(mm)
|Working length of rolls(mm)
|Front roll surface speed(m/min)
|Motor power (kw)
|dimension(L× W× H)(mm)
||3950× 1800× 1780
||4770× 1846× 1835
||5064× 2284× 1978
Some production process details:
1. This Tyre Recycling Machine including main machine and accessorial equipment, it is used for recycling scrap-tire (steel tyre and textile tyre), the final product is rubber powder or reclaimed rubber
2. The magnet separator and granulator grinder is optional.
3. The investment on this production line is small and the footprint is small. It is easy to operate, only need 5 workers.
4. Analysis for output
XKP400 rubber crusher:
Output: 5000-6500kg/24 hour for about 28 mesh granule.
XKP450 rubber crusher:
Output: 8000-9500kg/24 hour for about 28 mesh granule.
XKP560 rubber crusher:
Output: 11000-13500kg/24 hour for about 28 mesh granule.
5. You don`t need the Granulator Grinder if your final rubber powder is less than 30 mesh. But we need it if the powder bigger than 30 mesh and the number of this machine depend on the output.
Our company produces a full set of waste tyre recycling machine, which is used to make rubber powder from old tyre, like rail tyre, engmeenng tyre and other old tires. It can produce 20 - 80 mesh rubber powder.
Related Production Links
1. What does your factory do regarding quality control?
We pay much more importance to quality control from the very beginning to the end of production. Every machine will be fully assembled and carefully tested before shipment.
2. What's the machine quality guarantee?
Quality guarantee time is one year.We choose world famous brand components to keep our machine in perfect working condition.
3. Are you able to give installation and commissioning overseas?How long time will it take?
Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation. Small machine usually takes within 2~3 days. Big production line usually takes about 30 days.
4. How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed and confirmed in the order. The core of our company culture is innovation,quality,integrity and efficiency. Also we have had many good cooperation with world famous rubber production manufacturers.
If you come to our factory, we can show the user around us.
5. How can we go to your side?
We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao liuting airport. We will pick up you at the airport.
Before leaving factory, this plate vulcanizing press needs to pass 24 hours' pressure test, pressure maintaining to test the bearing of the hydro-cylinder and piston stroke and guarantee no oil leakage and seeping to avoid unnecessary quality problems.
We can design and manufacture all kinds of non-standard plate vulcanizing press according to the customers' definite requirements.
♦ Our engineers can design target machines for customers and send them the drawing to confirm. We are always on the side of saving your cost.
♦ In the process of production, we will take photos and send to customers for their track the progress.
♦ Documents such as packing list, commercial invoice, and bill of lading etc. will be sent after the delivery.
♦ We could supply free English foundation DWG, installation drawing, user guide, maintenance manual and part drawing.
♦ We supply overseas engineer service and help to train your workers to operate the machine.