|Name:||Kneader Machine||Working Volume Of Mixing Chamber:||55 Liters|
|Driving Motor Power:||75 Kw||Tilting Angle:||140°|
|Weight:||7100 Kg||HS CODE:||8477800000|
55 Litres Rubber Kneader Machine,
55 Litres Rubber Intensive Mixer,
7100 kg Rubber Kneader Machine
55 Litres Rubber Kneader / Rubber Dispersion Mixer / Intensive Mixer
1. The plastic material in airtight plastic pressure under the condition of refining or mixed refine, high production efficiency, low labor strength, stable quality. The two edges rotor shearing type, the production process the plastic materials that can be fully tear make the material shear well reach dispersion and evenness.
2. The edges of the rotor peak surfacing wear-resisting hard alloy, and mixing rubber room and material part of the contact all use hard chromium plating fine polishing processing. Mixed refine chamber adopts clip set of type structure, can be out water/steam/medium oil, have good cooling or heating effect, adapt to all kinds of refined rubber refining technological requirements of the plastic.
3. From the back door charging, mixing rubber room maximum flip 140 ° forward unloading, and according to the customer requirement of process can be arbitrary regulation Angle, facilitate next process of connection.
4. The switch on the "w" type, facilitate materials can be fully mixing rubber or refining.
5. The electric control system the programmable logic controller (PLC), has the alarm, unloading
operation, manual/automatic conversion, chain security protection function.
It consists of a "W" shape body and two side boards made of high quality steel plates by means of extrusion forming and welding, which are jacked to take the flow of cooling water or steam. It is plated with hard chrome on its internal walls.
There is a plug-in thermal resistance in middle section of the bottom of the chamber to be connected to electrical system to inspect and display the temperate.
It is designed to the hollow blades of Banbury type. The hollows are connected with axial hole of rotor shaft used as cooling or heating passage. The top edges of blades and the end faces of ~ rotor shaft are surface welded with cobalt-base hard alloy and grinding, then plating with hard chrome and polishing.
A common piping system is used .Cooling water/steam/medium oil is led in three ways into the cavities of the rotor wings ,the mixing chamber and the ram to cool or heat stock in a circulation way.
It consists of a rotor with brake, cycloidal gear reducer, TP type worm and worm gear, etc.. It is able to actuate the mixing chamber tilting by 140° around the front rotors.
|Total Volume of Mixing Chamber (L)||15||25||55||75||125||170||250||325|
|Working Volume of Mixing Chamber(L)||5||10||25||35||55||75||110||150|
|Driving Motor Power (KW)||11||22||37||55||75||110||185||220|
|Tilting Motor Power (KW)||1.1||1.1||1.5||2.2||2.2||4||5.5||11|
|Tilting Angle (°)||140||140||140||140||140||140||140||135|
|Rotating Speed of Rotor (Front / Rear)(r/min)||32/23.5||32/25||32/27||32/24.5||32/24.5||30/24.5||30/24.5||30/24.5|
|Pressure of Cooling Water (MPA)||0.2-0.4||0.2-0.4||0.2-0.4||0.3-0.4||0.3-0.4||0.3-0.4||0.3-0.4||0.3-0.4|
|Gross Weight (ton)||2.1||3.3||4.5||6.3||7.1||9.5||14.9||19.5|
Our main products includes:
★ Mixing Equipment: Rubber Kneader, Two Roll Mill, Rubber Sheeting Mill, Rubber Refining Mill, Rubber Crusher.
★ Curing Equipment: Pillar / Frame Type Plate Vulcanizing Press, Duplex Curing Press, Rubber Tiles Vulcanizing Press, Jaw Vulcanizing Press Machine, Large Plate Vulcanizing Machine, Automatic Plate Vulcanizing Molding Machine, etc.
★ Extruding Equipment: Hot Feed Extruder, Rubber Strainer, EPDM Rubber Extrusion& Vulcanizing Line.
★ Calender Equipment: Two Roll Calender, Three Roll Calender, Four Roll Calender, Inner Liner & Rubber Calender Line.
★ Waste Tires Recycling Equipment: Semi-automatic Waste Tires Recycling Line, Full- automatic Waste Tires Recycling Line, New Type Waste Tires Recycling Line. Fine Rubber Powder Pulverizer.
★ Other Equipment: Reclaimed Rubber Production Line, Batch-Off Cooler, Conveyor Belt Splicing Press, and so on.
Welcome to visit our factory!
Contact Person: Kenny Liu