|Model:||X(S)-110X30||Working Volume (L):||110|
|Driving Motor Power (KW):||185||Tilting Motor Power (KW):||5.5|
|Tilting Angle (°):||140||Pressure Of Colling Water (MPA):||0.3-0.4|
|Overal Dimension (L*W*H) (mm):||4075x2712x3580||Gross Weight (KG):||14900|
|Total Volume (L):||250|
Environmentally Friendly Rubber Banbury Mixer,
Jacket Type Rubber Banbury Mixer,
Banbury Rotor Rubber Kneader Machine
Rubber Banbury Mixer
1. The mixing chamber is forged of the jacket type providing good cooling or heating effect. Its working face is built up by welding with sintered carbide to resist abrasion and corrosion.
2. The rotor shaft is bored and welded with the Banbury rotor, forming the integrated construction. Water or steam can be led through the cavity to cool or heat it. The rotor wings are built up by welding with sintered carbide on the top and two side surfaces to resist abrasion and corrosion.
3. The hydraulic sealing that is pressurized externally is used for the end faces of the rotor. The pressure is adjustable and the sealing effect is good.
4. Operation of the discharge door is driven by the double-rack tilting cylinder with the crank retaining mechanism so that installation is easy, the start pressure low, the mechanical efficiency high, and the operation safe and reliable. The discharge door is of the drillhole cooled type and the working surface is built up by welding with sintered carbide.
5. The advanced PLC control technology and the intelligent display terminal are used for the control system.
|Total Volume of Mixing Chamber (L)||45||55||75||125||170||250||325||440|
|Working Volume of Mixing Chamber (L)||20||25||35||55||75||110||150||200|
|Driving Motor Power (KW)||37||37||55||75||110||185||220||280|
|Titling Motor Power (KW)||1.5||1.5||2.2||2.2||4||5.5||11||11|
|Rotational Speed of The Rotor (front/rear) (r/min)||32/27||32/27||30/24.5||30/24.5||30/24.5||30/24.5||30/24.5||30/24.5|
|Pressure of Compressed Air (m³/min)||≥0.7||≥0.7||≥0.9||≥1.0||≥1.0||≥1.5||≥2.0||≥4.0|
|Pressure of Cooling Water(mixing rubber) (MPa)||0.2~0.4||0.2~0.4||0.3~0.4||0.3~0.4||0.3~0.4||0.3~0.4||0.3~0.4||0.3~0.4|
|Pressure of Heating Steam (plastic mixing) (MPa)||0.5~0.8||0.5~0.8||0.5~0.8||0.5~0.8||0.5~0.8||0.5~0.8||0.5~0.8||0.5~0.8|
|Gross Weight (T)||~4||~4.5||~6.3||~7.1||~9.5||~14.9||~19.5||~22.5|
Qingdao shun cheong rubber machinery manufacturing co.,ltd is a chinese manufacturer with establishment in 2007, and have 10 years experience in making various of rubber machines area, also pass the ISO 9001:2008 , SGS, CE certificates too.
our factory major in rubber kneader/rubber mixing mill ; various of plate vulcanizing press ; 2 roll/3 roll/4 roll rubber calender; rubber batch off cooler; waste tire recycling line;reclaimed rubber production line;conveyor belt production line;rubber seals extruding &vulcanizing line etc...
Market: our machineries have exported to America, Mexico, ndia, Vietnam, South Africa, Singapore, Malaysia, Indonisia, Australia, Sri Lanka and many other countries and regions.
Product quality and after-sales service is the key to survival of Qingdao Shun Cheong Machinery Co.,Ltd, and also are top priorities of management of the company, the company commitment to all customers as follows:
1. Every parts pass strict quality inspection before storage.
2. All the products overload trial running before shipment, such as Plate Vulcanizing Press,to test pressure for 24 hours under 1.25 times the rated working pressure. Rubber Mixing Mill, rubber mixing 20 minutes under 1.1 times amount of the rated mixing rubber etc.
3. The whole body of all products are with free technical support.
4. The warranty period of 3 years for main parts, wearing parts for 1 year warranty.
5. The products issues quality problems in the use process, first of all, our sales staff and engineers through the Internet or telephone guidance service, if not solve we will find a local agent or factory's engineer to door repair for the first time! In order to better serve customers, the company provides conveyor belt, waste tire recycling line and tire and other rubber products production site for customers to visit, consultation.
♦ Our engineers can design target machines for customers and send them the drawing to confirm. We are always on the side of saving your cost.
♦ In the process of production, we will take photos and send to customers for their track the progress.
♦ Documents such as packing list, commercial invoice, and bill of lading etc. will be sent after the delivery.
♦ We could supply free English foundation DWG, installation drawing, user guide, maintenance manual and part drawing.
1. What does your factory do regarding quality control?
We pay much more importance to quality control from the very beginning to the end of production. Every machine will be fully assembled and carefully tested before shipment.
2. What's the machine quality guarantee?
Quality guarantee time is one year.We choose world famous brand components to keep our machine in perfect working condition.
3. Are you able to give installation and commissioning overseas?How long time will it take?
Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation. Small machine usually takes within 2~3 days. Big production line usually takes about 30 days.
4. How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed and confirmed in the order. The core of our company culture is innovation,quality,integrity and efficiency. Also we have had many good cooperation with world famous rubber production manufacturers.
If you come to our factory, we can show the user around us.
5. How can we go to your side?
We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao Jiaodong airport. We will pick up you at the airport.
Contact Person: Mandy Yang