This rubber compound two roll mill is mainly used in Rubber & Plastic Product factory for Natural Rubber Mixing(plasticating), Raw Rubber and Compound mixing, rubber warm-up mixing and pressing sheet.
1. Machine frame, gland and base are all welded through steel plates, after annealing, completely processed by precise machine tool. The whole machine frame, gland and base are all of strong rigidity, won't deform and the surface is smooth and anti-wear.
2. The 2 ends of the rolls adopt double roller rolling aligning bearings. Bearings adopt automatic thin oil lubrication system. Roll Bearings adopt automatic thin oil lubrication style.
3. Rollers cooling water adopt copper rotary joints. Rollers are made of chilled cast iron, front and rear rollers are hollow type, so as to achieve better temperature control effect, the working surface hardness is 68 ~ 72HSD.
4. Reducer adopts square ZSYF355 hard tooth gear reducer, 6 grade precision, very low noise, long service life.
5. Roller bearings: High precision self-aligning roller bearings.
6. Emergency Brake Equipment: In front and rear of the machine are equipped with 4 emergency stopping buttons and also in the mill base is equipped a Kick-style stop switch.
7. Equipment safety devices. To protect the machine main parts from damage, the machine is connected with safety pads protection device. When the machine is overloaded, the safety disc will rupture protecting the main parts of the equipment from damage.
8. Our electric control device is mainly composed of electric motor, brake solenoid, limit switches and electrical controlling. This device is installed on the machine base (including electric controlling system) along with the machine packed and transported together. Before the machine leaving the factory, the wire from the motor to electric control cabinet is connected. The customer only needs to connect the control cabinet wire to the power supply before using the machine.
||Front Roller Linear Speed(m/min)
|Overall Dimension (LxWxH)(mm)
1,Our engineers can design target machines for customers and send them the drawing to confirm. We are always on the side of saving your cost.
2,In the process of production, we will take photos and send to customers for their track the progress.
3,Documents such as packing list, commercial invoice, and bill of lading etc. will be sent after the delivery.
4,We could supply free English foundation DWG, installation drawing, user guide, maintenance manual and part drawing.
5,We supply overseas engineer service and help to train your workers to operate the machine.
1. Delivery time of the rubber machines?
This is specially designed machine according to your specific requirement.
From engineer designing to production completion, it needs about 25 to 35 days.
2. What does your factory do regarding quality control?
We pay much more importance to quality control from the very beginning to the end of production.
Every machine will be fully assembled and carefully tested before shipment
3.The base is integral type , the transmission mode is of closed transmission . so it is safe and easy for use
4.The machine is installed with the emergency button and pulling rope as the safety device
5.This machine are installed with four sets lubrication device and suitable for grease lubrication
6.The machine adopts the PLC control cabinet , the machine will be suitable for your local industrial voltage and frequency