|Name:||Rubber Sheet Cooler||Control:||PLC|
|Safety Design:||Interlock Design||Voltage:||As Per Your Requirement|
|Specification:||As Per Your Requirement||HS Code:||84778000|
|Material Of Cooling Rooler:||Stainless Steel|
SS Rubber Sheet Cooling Machine,
PLC Control Rubber Sheet Cooling Machine,
Rubber Sheet Cooling Machine ISO
Rubber Slab Cooling Unit / Rubber Film Cooling Machine / Rubber Sheet Cooling Device
1. Main application
As a downstream auxiliary of internal mixer, it is mainly used for coating with release agent, cooling, drying and pack stacking, working with internal mixer, extruding sheeter, open mixing mill, etc.
1. The operation of coating with release agent, cooling, drying and pack stacking are performed in a signal machine and realize continuous production at high efficiency.
2. Cooling part is equipped with fans of low power, low noise and high wind pressure. It adopts packet start with good cooling effect.
3. Use of PLC and the frequency-control speed regulation make it easy to control the whole process.
4. There are floor type, overhead type, hang-up type, flat net type, etc to choose from according to customer's requirement.
|Structure||Floor-standing type||Chain-Belt type||Overhead type||Overhead type|
|Max. Rubber Sheet Width (mm)||600||600||800||900|
|Rubber Sheet thickness (mm)||4-10||2-12||4-10||6-12|
|Temperature over room temperature after rubber sheet cooling (º C)||10||10||15||5|
|Linear Speed of taking-in conveyor (m/min)||3-24||3-24||3-35||4-40|
|Linear speed of sheet-hanging chain (m/min)||0.82||Chain-belt layer: 5||0.117-1.17||4-40|
|Hanging height of the sheet hanging bar (m)||1000-1500||Net||1000-1500||1400|
|No. of cooling fans (set)||12||20||18-26|
|Total power (KW)||13.7||28.8||18-34|
1. What does your factory do regarding quality control?
We pay much more importance to quality control from the very beginning to the end of production. Every machine will be fully assembled and carefully tested before shipment.
2. What's the machine quality guarantee?
Quality guarantee time is one year.We choose world famous brand components to keep our machine in perfect working condition.
3. Are you able to give installation and commissioning overseas?How long time will it take?
Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation. Small machine usually takes within 2~3 days. Big production line usually takes about 30 days.
4. How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed and confirmed in the order. The core of our company culture is innovation,quality,integrity and efficiency. Also we have had many good cooperation with world famous rubber production manufacturers.
If you come to our factory, we can show the user around us.
5. How can we go to your side?
We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao liuting airport. We will pick up you at the airport.
♦ Our engineers can design target machines for customers and send them the drawing to confirm. We are always on the side of saving your cost.
♦ In the process of production, we will take photos and send to customers for their track the progress.
♦ Documents such as packing list, commercial invoice, and bill of lading etc. will be sent after the delivery.
♦ We could supply free English foundation DWG, installation drawing, user guide, maintenance manual and part drawing.
♦ We supply overseas engineer service and help to train your workers to operate the machine.
Contact Person: Kenny Liu