|Name:||Hot Air Vulcanizing Machine||Condition:||New|
|Raw Material:||EPDM, Silicone Rubber||Dimension:||8900 X 850 X 1350 Mm|
|Place Of Origin:||Qingdao, China||SH Code:||84778000|
EPDM Rubber Making Machine,
EPDM Vulcanization Production Line,
Continuous Rubber Vulcanization
Hot Air Tunnel / Hot Air Vulcanization Machine / Microwave Vulcanization for EPDM Rubber Profile Production Line
Automatic thermostat circulating vulcanizing box is the vulcanization device of rubber seals.
Appearance requirements: Smooth and tidy.
(1) This machine is used to electricity heating tube automatic thermostat which temperature control accuracy of +/-2° C, the
temperature range at room temperature to 260 degrees.
(2) Effective length of vulcanization box is 30 m, centrifugal fan circulation. It liner with 120 stainless steel and the middle
insulating layer is fully filled with aluminum silicate cotton.
(3) Vulcanization box is divided into three zones, each zone with trimmer potentiometer which adjusts the speed of the three zones
of vulcanizing box to equilibrium; In the middle of each zone with the ventilating device, and removing the emissions generated by
the vulcanization process in time in order to ensure the smoothness of the rubber products.
2. The entire production line speed is adjustable to match with speed of the extruder.
(1)The Highest temperature 280ºC
(2)Temperature rising speed 45 minute from room temperature to 260ºC
(3)Conveying speed 5-28 m/min
(4)Conveying height 1000±3mm
(5) Heating Power 24-30kw
(6)Voltage 3 phase AC380V 50HZ
(7)Fan motor 1.1kw
(8) Air volume 38 m³/min
(9) Power delivery 0.75kwx3
(10) Total box number 3
(11)Total length 30000 mm
(12) Speed move 5-28 m/min
(13)Speed control Frequency control ( VVVF)
|Tank Temperature||Room Temp. - 250ºC|
|Time Of Temperature Rising From 20ºC To 250ºC||40 min|
|Conveyor Direction||Right > Left (Facing Machine)|
|Product Exit Size||140mm(H)x180mm(W)|
|Product Conveying Height||F.L.~1050+20-30mm|
|Structure||Vulcanizing Tank, Conveyor Equipment,
Hot Air Device, Emergency Stop Switch, Control System.
1. We not only provide you machines but also offer the professional technical guidance and market evaluate.
2. We will provide all the machines for the complete production according to customer's requirements.
3. We will provide complete service for factory layout and other information to help customer to build the factory.
4. We will provide good service for machine installation and training, until the customers can run the machines and make stably production.
5. Except one year quality guarantee, we will provide after-sell service for all the life.
6. For long-term cooperation, we always provide good quality, good price and good service to customer.
Contact Person: Kenny Liu