|
Product Details:
Payment & Shipping Terms:
|
| Roll Material: | Chilled Cast Iron | Heating: | Electricity / Oil / Steam |
|---|---|---|---|
| Basement And Frame: | Welding And Machining | Lubrication: | Automatic Dry / Thin Oil By Pump |
| Bearing: | Automatic Dry / Thin Oil By Pump | Gearbox: | Low Noise Hard Gear Reducer |
| Highlight: | Low Noise Rubber Calender Machine,SFC Calender Machine 2 Roll,SFC Calender Machine |
||
High Efficiency Rubber Calender Machine with 2 Roll 3 Roll 4 Roll
Usage:
Rubberizing and fractioning of textile material, rubberizing of wirecord fabric, sheet, and counter plate(embossed) of rubber material, separation of fabric and film, as well as joint of multi-layer laminate film.
Rubber Calender Machine General design:
It mainly contains roller, rack, backplane, adjustment, device, transmission system, roller temperature control device, security device, lubricating device, etc.
Rubber Calender Machine Features:
1. The roller is made of chilled cast iron alloys, whose work surface has high hardness, wear-resistent and durable life.
Steam, cooling water, and heat-conducting oil can pass into the rollers cavity, so that the working temperature can be adjusted in order to meet the technical requirements.
2. Roll spacing can be adjusted both by manual or electric mode.
3. Roller bearings lubricating can adopt drier oil or dilute oil.
Application:
1. The Roll Rubber Calender - Rubber Machinery is mostly used in oppression of rubber products and textile(like cotton, rayon, nylon etc). The precision calender besides has the ordinary calender main spare part and the equipment, increased the guarantee rolling precision installment.
2. We have three-roll, four-roll and two-roll calender, should any of items be of interest to you, please contact me for further details.
3. Two Roll Rubber Calender - Rubber Machinery is according to certain form arrangement, under certain temperature, extends the rubber or the plastic suppression certain thickness and the superficial shape film.
Two Roll Parameter:
| Model | XY-2I-320 | XY-2I-630 | XY-2I-900 | XY-2I-1500 | XY-2I-1830 | XY-2I-1730 |
| Roller Diameter | 160 | 230 | 360 | 450 | 550 | 610 |
|
Roller Working Length(mm) |
320 | 630 | 900 | 1500 | 1830 | 1730 |
| Speed Ratio | 1:1 | 1:1 | 1:1 | 1:1 | 1:1.08 | 1:1 |
|
Roller Linear Speed(r/min) |
7.79 | 14.8 | 3-20.2 | 2.5-24.8 | 2-18.7 | 4-36 |
|
Nip Adjustment Range(mm) |
0-4.5 | 0-5.5 | 0-10 | 0-10 | 0-12 | 0-15 |
|
Min. Thickness of Products(mm) |
0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 |
| Products Width(mm) | 250 | 580 | 920 | 1250 | 1600 | 1500 |
|
Main Motor Power(KW) |
5.5 | 15 | 37 | 45 | 75 | 90 |
Three Roll Parameter:
| Model | XY-630 | XY-900 | XY-1120 | XY-1400 | XY-1500 | XY-1730 | XY-2130 | XY-2430 |
| Roll DiameterxLength | 230x630 | 360x900 | 360x1120 | 400x1400 | 450x1500 | 610x1730 | 710x2130 | 810x2430 |
| Friction Ratio |
1:1:1 1:1.42:1 |
1:1:1 0.733:1:1 0.733:1:0.733 |
1:1:1 |
1:1:1 1:1.383:1.383 1:1.383:1 |
1:1:1 1:1.5:1 |
1:1:1 1:1.4:1 |
1:1:1 |
1:1:1 1:1.5:1 |
|
Middle Roller Linear Speed(RPM) |
0.8-8 | 3-21.06 | 1.5-15 | 3-26.39 | 2.62-26.2 | 5.4-54 | 8-50 | 2-20 |
|
Nip Adjustment Range(mm) |
0-7 | 0-10 | 0-10 | 0-10 | 0-6 | 0-20 | 0-20 | 0.5-25 |
|
Min. Thickness of Products(mm) |
0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.15 | 0.15 | 0.15 |
| Products Width(mm) | 100-500 | 700 | 920 | 1200 | 1400 | 1530 | 1900 | 2150 |
|
Main Motor Power(KW) |
7.5 | 45 | 45 | 55 | 75 | 132 | 185 | 220 |
Four Roll Parameter:
| Model | XY-4Г630 | XY-4Г1120 | XY-4Г1400 | XY-4Г1500 | XY-4Г1730 | XY-4Г2130 | XY-4Г2430 |
| Roll Specification | 230x630 | 360x1120 | 400x1400 | 450x1500 | 610x1730 | 710x2130 | 810x2430 |
| Speed Ratio | 1:1:1:1 | 0.73:1:1:0.73 | 1:1.383:1.383:1 | 1:1.5:1.5:1 |
1:1.4:1.4:1 1:1.4:1.4:1.4 |
1:1.48:1.48:1 1:1.48:1.48:1 |
1:1.5:1.5:1 |
|
Middle Roller Speed(RPM) |
2.1-21 | 2-20.1 | 3-26.3 | 2.5-25 | 8-50 | 8-50 | 2-20 |
| Min. Thickness of Products(mm) | 0.2 | 0.2 | 0.2 | 0.2 | 0.15 | 0.15 | ±0.1 |
| Products Width(mm) | 100-500 | 500-920 | 1200 | 1250 | 1500 | 1900 | 2150 |
|
Main Motor Power(KW) |
15 | 55 | 75 | 110 | 160 | 185 | 280 |
Our Services
♦ Our engineers can design target machines for customers and send them the drawing to confirm. We are always on the side of saving your cost.
♦ In the process of production, we will take photos and send to customers for their track the progress.
♦ Documents such as packing list, commercial invoice, and bill of lading etc. will be sent after the delivery.
♦ We could supply free English foundation DWG, installation drawing, user guide, maintenance manual and part drawing.
♦ We supply overseas engineer service and help to train your workers to operate the machine.
Welcome your inquiry!
Contact Person: Jake Chen
Tel: +8613963975727
Fax: 86-532-8518-5697
